8.2 Ton Backhoe Loader LC-B388: 75 kW, 1 m³ Bucket
8.2-ton backhoe loader LC-B388: operating weight 8,200 kg, rated power 75 kW / 2,200 rpm, loader bucket 1.0 m³, maximum digging depth 4,085 mm.

The LICH LC-B388 is an 8.2 t backhoe loader that combines a 1.0 m³ front loader bucket with a 0.3 m³ rear backhoe for loading, trenching and general construction work.
A Yuchai YC4A105Z-T20 turbocharged diesel rated at 75 kW drives through a YJ290 torque converter with two forward and two reverse gears. Standard and higher-trim cabs are available; each quotation states the selected configuration.
The LC-B388 is an 8.2-ton backhoe loader. LICH backhoe loaders run from the LC-B30 (7.6 t) to the LC-B388T (8.2 t). The LC-B388 sits between the LC-B30 (7.6 t) and the LC-B388T (8.2 t). Engine power works out at 9.1 kW per tonne of operating mass.
In imperial units: operating weight 18,078 lb, rated power 101 hp, loader bucket 1.31 yd³, maximum digging depth 161 in.
Applications
- Trenching and pipe laying
- Material loading
- Municipal and road maintenance
- Farm and landscaping work
- Site preparation
Loader and backhoe in one
A 1.0 m³ loader bucket with 2,500 kg lifting capacity and a 0.3 m³ backhoe on one compact machine.
Side-shift backhoe
The backhoe mounting slides sideways to widen the digging range next to walls and kerbs.
Tilting front hood
A front-flip hood gives direct access for daily engine service.
Operator comfort
Rotating suspension seat and a fully glazed cab for all-round visibility.
Weight & Loader
| Operating Weight | 8,200 kg |
|---|---|
| Wheelbase | 2,280 mm |
| Wheel Tread | 1,785 mm |
| Minimum Ground Clearance | 300 mm |
| Loader Bucket Capacity | 1.0 m³ |
| Loader Lifting Capacity | 2,500 kg |
| Loader Breakout Force | 47 kN |
| Loader Digging Depth | 52 mm |
| Bucket Lift / Lower / Dump Time | 6.8 / 3.1 / 2.0 s |
| Rated Axle Load (front / rear) | 22.5 t / 18.5 t |
Backhoe
| Backhoe Bucket Capacity | 0.3 m³ |
|---|---|
| Maximum Digging Depth | 4,085 mm |
| Backhoe Dumping Height | 3,795 mm |
| Backhoe Swing Angle | 180° |
| Bucket Digging Force | 50 kN |
| Arm Digging Force | 31 kN |
Engine & Drivetrain
| Engine Model | Yuchai YC4A105Z-T20 |
|---|---|
| Engine Type | Inline, direct injection, water-cooled, turbocharged, 4-stroke |
| Cylinders – Bore × Stroke | 4 – 108 × 132 mm |
| Rated Power | 75 kW / 2,200 rpm |
| Maximum Torque | 400 N·m |
| Displacement | 4.8 L |
| Minimum Fuel Consumption | 230 g/kW·h |
| Torque Converter | YJ290 |
| Gears | 2 forward / 2 reverse |
| Maximum Speed | 24 km/h |
| Maximum Traction Force | 60 kN |
| Tyres (front / rear) | 14-17.5 / 19.5L-24 |
| Tyre Pressure (front / rear) | 0.4 / 0.35 MPa |
Steering & Brakes
| Steering Unit | BZZ5-250 |
|---|---|
| Steering Angle | ±36° |
| Minimum Turning Radius | 6,581 mm |
| Service Brake | Air-over-oil caliper disc, external, self-adjusting |
| Parking Brake | Manual |
Send LICH your job, destination and attachment needs: the engine, attachments and full configuration are written into your quotation, and certificates are supplied with the order documents.