LICH

14 Ton Hydraulic Double Drum Vibratory Roller LC214

14-ton road roller LC214, a hydraulic double drum vibratory roller: operating mass 14,000 kg, drum width 2,100 mm, rated power 110 kW.

LC214 Hydraulic Double Drum Vibratory Roller

The LC214 is a 14,000 kg hydraulic double-drum vibratory roller for road surface compaction. Its 2,100 mm wide drums use two vibration frequencies and amplitudes, with hydraulic drive and articulated steering.

It has a 110 kW engine, travel speed up to 12 km/h and two 600 L water tanks. The enclosed cab includes air conditioning and a rotating operator seat. Crab steering is available as an option.

The LC214 is a 14-ton tandem roller. LICH lists 10 tandem rollers, from the LC600 (560 kg) to the LC214 (14 t). It is the heaviest of them; the next size down is the LC208 (8 t). Engine power works out at 7.9 kW per tonne of operating mass.

In imperial units: operating mass 30,865 lb, drum width 82.7 in, rated power 148 hp, travel speed 0–7.5 mph.

Applications

  • Road surface compaction
  • Asphalt paving projects
  • Urban road construction
  • Paved industrial areas

Dual-Drum Vibration

Both steel drums use hydraulic vibration with high/low amplitudes of 0.8/0.4 mm and frequencies of 40/46 Hz.

Hydraulic Drive and Steering

Hydraulic double-drum drive and articulated steering provide stepless travel up to 12 km/h. Crab steering is optional.

Enclosed Operator Cab

The cab includes air conditioning and a rotating operator seat.

Drum Water Spray

Electrically controlled water spray serves the front and rear drums, supplied by two 600 L tanks.

Mass and Compaction

Operating Mass14,000 kg
Front Axle Load7,000 kg
Rear Axle Load7,000 kg
Static Linear Load333 N/cm
Vibration Amplitude (High/Low)0.8 / 0.4 mm
Vibration Frequency (High/Low)40 / 46 Hz
Centrifugal Force (High/Low)160 × 2 / 90 × 2 kN

Travel and Dimensions

Travel Speed0–12 km/h
Turning Radius7,000 mm
Gradeability30%
Steering Angle±30°
Drum Oscillation Angle±8°
Drum Diameter1,350 mm
Drum Width2,100 mm
Overall Length5,060 mm
Overall Width2,250 mm
Overall Height3,300 mm
Wheelbase3,717 mm
Ground Clearance324 mm
Frame FormFork-type

Engine and Capacities

Engine Model (Stage II Configuration)Cummins 6BT5.9
Engine Model (Stage III Configuration)Cummins QSB5.9
Rated Power110 kW
Rated Speed2,300 rpm
Water Tank Capacity2 × 600 L
Fuel Tank Capacity174 L
Hydraulic Tank Capacity75 L

Send LICH your job, destination and attachment needs: the engine, attachments and full configuration are written into your quotation, and certificates are supplied with the order documents.