LICH

LCS718H Hydraulic Single Drum Vibratory Roller

LCS718H Hydraulic Single Drum Vibratory Roller. 18,000 kg single-drum roller with hydraulic rear-wheel drive, a 2,130 mm drum and two vibration frequencies.

LCS718H Hydraulic Single Drum Vibratory Roller

The LCS718H is a smooth single-drum vibratory roller with hydraulic rear-wheel drive and articulated steering. The front drum provides vibration; this is the single-drive model, not the double-drive version.

The published specification lists an operating mass of 18,000 kg, a 140 kW WP6G190 engine and a maximum travel speed of 11 km/h. The photos show the smooth-drum configuration. Removable padfoot equipment is optional and must be specified separately.

Applications

  • Road base compaction
  • Earthwork compaction
  • Foundation preparation
  • Construction site preparation

Hydraulic Rear-Wheel Drive

Stepless forward and reverse travel with hydraulic rear-wheel drive and articulated steering.

Two Vibration Settings

The source table specifies amplitudes of 1.9/0.95 mm, frequencies of 28/35 Hz and centrifugal forces of 390/280 kN.

WP6G190 Engine

A 140 kW WP6G190 diesel engine is listed for this model.

Smooth Drum Configuration

The shown configuration uses a smooth steel drum. Removable padfoot equipment is an option, not a standard item shown in these photographs.

Mass and Compaction

Operating Mass18,000 kg
Static Linear Load470 N/cm
Vibration Amplitude1.9 / 0.95 mm
Vibration Frequency28 / 35 Hz
Centrifugal Force390 / 280 kN
Drum Width2,130 mm

Travel and Dimensions

Maximum Travel Speed11 km/h
Gradeability35%
Minimum Turning Radius7,500 mm
Overall Length6,665 mm
Overall Width2,340 mm
Overall Height3,250 mm
Wheelbase3,500 mm

Engine and Drive

Engine ModelWP6G190
Rated Power140 kW
Drive ConfigurationHydraulic rear-wheel drive

Send LICH your job, destination and attachment needs: the engine, attachments and full configuration are written into your quotation, and certificates are supplied with the order documents.