LICH

5-Ton Wheel Loader LC-L956G: 3 m³ Bucket, 162 kW

LC-L956G 5-ton wheel loader: rated load 5,000 kg, rated power 162 kW, bucket capacity 3 m³, operating weight 16,650–16,950 kg.

LC-L956G 5-Ton Wheel Loader

The LICH LC-L956G combines a 5,000 kg rated load with a 3 m³ bucket. Its articulated chassis has a 3,250 mm wheelbase and a 3,150 mm unloading height.

It has a 162 kW WD615G.220 engine, four forward and four reverse gears, and automatic bucket leveling. Operating weight ranges from 16,650 to 16,950 kg, depending on the engine and transmission selected.

The LC-L956G is a wheel loader with a 3 m³ bucket. LICH wheel loaders run from the LC-L936G (1.8 m³ bucket) to the LC-L960HEV (3.5 m³ bucket). The LC-L956G sits between the LC-L936G (1.8 m³) and the LC-L960EV (3.5 m³).

In imperial units: rated load 11,023 lb, rated power 217 hp, bucket capacity 3.92 yd³, operating weight 36,707–37,368 lb.

Applications

    5-ton capacity

    Rated load of 5,000 kg with a 3 m³ bucket.

    Automatic bucket leveling

    Automatic leveling function and 17 MPa hydraulic working pressure.

    Enclosed cab

    The cab has air conditioning with a defrosting function.

    Capacity & Dimensions

    Rated bucket capacity3 m³
    Rated load capacity5,000 kg
    Operating weight — Shangchai / ZF16,650 kg
    Operating weight — Weichai / Beilian16,910 kg
    Operating weight — Weichai / ZF16,950 kg
    Operating weight — Weichai / Hangchi16,910 kg
    Unloading height at 45°3,150 mm
    Unloading distance at 45°1,250 mm
    Wheelbase3,250 mm
    Wheel tread2,250 mm
    Minimum ground clearance450 mm
    Articulation angle±35°
    Overall size, bucket flat on ground8,250 × 2,880 × 3,570 mm
    Bucket width2,950 mm
    Hinge height at maximum lift4,125 mm
    Unloading angle45°
    Rear axle oscillation±12°

    Performance

    Bucket rollback — transport position50°
    Bucket rollback — ground position46°
    Bucket rollback — maximum lift54°
    Maximum traction force≥145 kN
    Turning radius — transport position5,950 mm
    Machine outside turning radius6,840 mm
    Maximum climbing angle28°
    Tipping load98 kN
    Maximum breakout force≤175 kN
    Raise time — rated load5.95 s
    Lowering time — no load3.5 s
    Bucket tilt time1.5 s

    Engine & Transmission

    Engine modelWD615G.220
    Engine typeIn-line, water-cooled, dry liner, direct injection
    Cylinders / bore × stroke6 / 126 × 130 mm
    Nominal power162 kW
    Nominal speed2,200 rpm
    Maximum torque980 N·m
    Minimum fuel consumption≤213 g/kW·h
    Torque converterSingle-stage, two-phase, four-element
    TransmissionPowershift, planetary structure
    Gears4 forward / 4 reverse
    Maximum speed38 km/h

    Axles, Hydraulics & Brakes

    Main reductionSpiral bevel gear, single-stage
    Wheel-side reductionSingle-stage planetary
    Multi-way valveD32
    Regulating pressure17 MPa
    Hydraulic working pressure17 MPa
    Diesel tank capacity230 L
    Automatic bucket levelingYes
    Service brakeAir-over-oil caliper disc, four wheels
    Parking brakeManual caliper disc
    Tyre size23.5-25
    Front tyre pressure0.4 MPa
    Rear tyre pressure0.35 MPa

    Send LICH your job, destination and attachment needs: the engine, attachments and full configuration are written into your quotation, and certificates are supplied with the order documents.