LICH

Motor Grader Manufacturers: 7 Brands Compared

Motor grader manufacturers compared: LICH's nine graders plus CASE, Cat, John Deere, Komatsu, Mahindra, SANY and SDLG, by weight and power per tonne.

Published by LICH ·

Motor grader manufacturers publish their machines in very different ways: some list every model with weight and power, others show the product family on the page. This guide starts with LICH, which supplies nine motor graders from 12 to 28 t with full published figures, then compares seven well-known motor grader manufacturers on what each states on its own website. It also works out one figure most of them do not print, power per tonne of machine, and shows that LICH graders sit in the same band as the big brands.

Every LICH grader is on the motor grader page with its full specification.

Why buy motor graders from LICH

LICH, the brand of Henan Lichi Intelligent Equipment Co., Ltd. in Zhengzhou, supplies nine motor graders for export:

  • 12 to 28 t in one range, from the 97 kW LC-G130 to the 268 kW LC-G350.
  • Cummins engines on eight of the nine models, from the 6BT5.9 on the LC-G130 to the QSM11 on the LC-G320 and LC-G350.
  • Power per tonne in line with the big brands: 8.1 to 10.1 kW/t, inside the 7.9 to 10.4 kW/t band of the CASE, Komatsu, John Deere and SDLG models compared below.
  • Power-shift transmissions with six forward and three reverse gears on every model.
  • Full figures published: moldboard size, grading depth, blade lift, drawbar pull, transmission and tyres for models such as the LC-G170.
  • Options for harder work: the LC-G220-B offers 360° blade slewing, an optional front blade and an optional five-tooth rear ripper.

Send us the job, the weight class and your destination port, and we will match the model and quote the exact configuration.

Motor grader manufacturers at a glance

Brand What its website shows
LICH Nine motor graders from 12 to 28 t, eight with Cummins engines, supplied for export from Zhengzhou, China
CASE D Series motor graders, including the 836D and 856D
Caterpillar (Cat) Motor graders in multiple sizes for road construction, road maintenance, site preparation, mining and heavy earthmoving
John Deere G-Tier and P-Tier motor graders, with models from the 620 to the 872
Komatsu Motor graders including the GD655-6, with an EPA Tier 4 Final engine
Mahindra RoadMaster G80, G90 and G100 motor graders, presented as built for India’s roads
SANY STG and SMG series motor graders
SDLG A motor grader range from the G9138H to the G9380H

LICH first, then the other brands in alphabetical order. Source: the LICH product catalogue and each company’s website, read on 13 November 2026.

LICH LC-G190 motor grader
LC-G190 motor grader: 15,600 kg, 142 kW, 4,268 mm moldboard.

Published models and figures

Five of the seven motor grader manufacturers give weight and power on their websites.

Brand Model Operating weight Power
CASE 836D 12,018 kg 102 kW
CASE 856D 15,420 kg 129 kW
Komatsu GD655-6 16,940 kg 163 kW
John Deere 620 P-Tier 18,340 kg 160 kW
John Deere 872 P-Tier 21,614 kg 224 kW
SDLG G9138H 13,275 kg 105 kW
SDLG G9220H 17,540 kg 170 kW
SDLG G9290H 25,800 kg 247 kW
SANY STG series 13–16.6 t 112–180 kW
SANY SMG series 16–20 t 153–186 kW
LICH 9 models, LC-G130 to LC-G350 12,000–28,000 kg 97–268 kW

Source: company websites and the LICH product catalogue, read on 13 November 2026. Power is the rated or net figure each site gives. SDLG also lists the G9380H at 37,100 kg, the heaviest grader in this table.

The common ground is the 12 to 20 t class: every brand with published figures has a model in it. Above that, the choice narrows. SDLG lists machines at 25,800 kg and 37,100 kg, John Deere reaches 21,614 kg with the 872 P-Tier, and LICH reaches 28,000 kg with the LC-G320 and LC-G350.

Power per tonne across brands

We divided each published power figure by the operating weight. The result shows how much engine each tonne of grader carries.

Model Operating weight Power per tonne
SDLG G9138H 13,275 kg 7.9 kW/t
LICH LC-G130 12,000 kg 8.1 kW/t
CASE 856D 15,420 kg 8.4 kW/t
CASE 836D 12,018 kg 8.5 kW/t
John Deere 620 P-Tier 18,340 kg 8.7 kW/t
LICH LC-G320 28,000 kg 8.8 kW/t
LICH LC-G170 14,500 kg 9.1 kW/t
SDLG G9290H 25,800 kg 9.6 kW/t
Komatsu GD655-6 16,940 kg 9.6 kW/t
LICH LC-G350 28,000 kg 9.6 kW/t
SDLG G9220H 17,540 kg 9.7 kW/t
LICH LC-G220-A 16,100 kg 10.1 kW/t
John Deere 872 P-Tier 21,614 kg 10.4 kW/t

Across 13 models from four motor grader manufacturers and LICH, power per tonne sits in a narrow band, from 7.9 to 10.4 kW/t. Brands size the engine to the machine in much the same way, and the four LICH models, from 8.1 to 10.1 kW/t, sit inside the same band. So the weight class decides most of a grader’s pushing and cutting ability, and the remaining differences sit in the blade, the transmission and the control system.

Figures to ask every motor grader manufacturer for

Ask each supplier for the same line of figures and set the quotes side by side. The reference column uses the LICH LC-G170 and LC-G220-B.

Figure Why it matters LICH reference
Operating weight Sets the class, the down-pressure and the transport plan LC-G170: 14,500 kg
Rated power Compare it per tonne, as in the table above LC-G170: 132 kW at 2,200 rpm
Moldboard length and height Width covered per pass and material carried LC-G170: 3,658 × 580 mm; LC-G220-B: 3,965 × 610 mm
Maximum grading depth and blade lift How deep it cuts and how high it carries LC-G170: 535 mm and 450 mm
Maximum drawbar pull Pulling force at the blade LC-G170: 74.6 kN
Transmission Working speeds and travel speed LC-G170: 6 forward / 3 reverse power shift
Ripper and front blade Hard ground and extra jobs LC-G220-B: optional 5-tooth rear ripper
Engine and emission stage Decides which markets accept the machine LC-G170: Cummins 6BTA5.9-C180

Figures from the LICH product catalogue, read on 13 November 2026. The blade angle and wear guide explains how the moldboard settings affect a cut.

LICH LC-G220-B motor grader with front blade
LC-G220-B: 16,900 kg, 160 kW, 3,965 mm blade with 360° slewing.

How to shortlist motor grader manufacturers

  1. Fix the weight class from the job. In the LICH range, the 12 t LC-G130 is listed for road grading, maintenance and site levelling, and the 28 t LC-G320 and LC-G350 for hard-surface cutting and large earthmoving sites.
  2. Check that each brand on your list has a model in that class, using the published figures above.
  3. Compare power per tonne rather than headline power, then compare blade size and drawbar pull.
  4. Confirm the engine version for your country’s emission rules.
  5. Check dealer support, parts and delivery for your region.
  6. Agree the shipping plan. A 28 t LICH grader measures 12,500 × 3,300 × 3,700 mm; a 12 t one 8,290 × 2,600 × 3,465 mm.

New to graders? Read what is a motor grader, and see motor grader vs bulldozer for how the two share a road job.

Motor grader manufacturers: questions

Who are the main motor grader manufacturers?

Well-known names include Caterpillar, CASE, John Deere, Komatsu, Mahindra, SANY and SDLG. Each lists motor graders on its own website.

Why buy a motor grader from LICH?

Nine models from 12 to 28 t, Cummins engines on eight of them, power per tonne in line with the big brands and full published figures for each model. Each quotation states the exact configuration supplied.

Which motor grader manufacturers are in China?

SANY and SDLG list motor graders on their websites. LICH, the brand of Henan Lichi Intelligent Equipment Co., Ltd. in Zhengzhou, supplies nine graders from 12 to 28 t for export.

What is the heaviest motor grader in this comparison?

The SDLG G9380H, at 37,100 kg. Among the other published figures, the LICH LC-G320 and LC-G350 weigh 28,000 kg.

How much power does a motor grader need?

Between 7.9 and 10.4 kW per tonne across the models compared here. A 14.5 t grader such as the LC-G170 carries 132 kW.

Get a LICH motor grader quote

Send us the job, the weight class and your destination port. We will send the matching LICH model with the full line of figures above, ready to set beside quotes from other motor grader manufacturers.