LICH

10 Ton Road Roller: 3 Models and Force per Tonne

Compare three 10 ton road roller models: two single drum machines with 260 kN force and a pneumatic tyre roller, and see how 10 t compares with 8 t and 12 t.

Published by LICH ·

A 10 ton road roller is the lightest machine in the LICH range that carries the full-size vibration system: 260 kN of centrifugal force at high amplitude, the same figure as the 12 t models. That makes it the hardest-hitting machine per tonne among the 8 to 18 t single drum rollers. LICH lists three machines at this weight: the mechanical-drive LC210B, the full-hydraulic LCD210H, and the LCP1016H pneumatic tyre roller, which weighs 10 t before ballast. This guide compares the three and shows what a 10 ton road roller gains over an 8 t machine and gives up to a 12 t one.

All of them are in the road roller range, with the drum machines under single drum rollers.

Three 10 ton road roller models

Item LC210B LCD210H LCP1016H
Type Single drum vibratory Single drum vibratory Pneumatic tyre
Weight 10 t class 10,000 kg 10,000 kg, 16,000 kg with ballast
Travel drive Mechanical Full hydraulic Full hydraulic, stepless
Engine Cummins 6BT5.9, 97 kW Cummins 6BT5.9 Cummins 4BT3.9 or QSB3.9, 75 kW
Compaction 260 / 160 kN at 30 Hz 260 / 160 kN at 28 / 35 Hz 4 front + 5 rear tyres, 2,280 mm wide
Travel speed 10.5 km/h 0–12 km/h 14 km/h
Gradeability 30% 35% 30%
Overall size (L × W × H) 5,650 × 2,280 × 3,000 mm 5,650 × 2,280 × 3,000 mm 5,000 × 2,280 × 3,200 mm

Source: LICH product catalogue, read on 13 November 2026. In imperial units 10,000 kg is 22,046 lb, or 11.0 US tons.

LCD210H 10 ton full-hydraulic single drum road roller
LCD210H: 10,000 kg, 260 / 160 kN, 35% gradeability.

Force per tonne: where 10 t stands

We divided the high-amplitude centrifugal force of each hydraulic single drum roller by its operating mass. The result shows how much vibration each tonne of machine delivers.

Model Operating mass Centrifugal force (high) Force per tonne
LCS208H 8,000 kg 70 kN 8.8 kN/t
LCD210H 10,000 kg 260 kN 26.0 kN/t
LCS212H 12,000 kg 260 kN 21.7 kN/t
LCS214H 14,000 kg 290 kN 20.7 kN/t
LC216B 16,000 kg 320 kN 20.0 kN/t
LCS718H 18,000 kg 390 kN 21.7 kN/t

The 10 ton road roller tops the list at 26.0 kN per tonne. The reason is in the first table: the 10 t models have the same overall size as the 12 t LC212B and LCD212H, 5,650 × 2,280 × 3,000 mm, and the same centrifugal force, 260 / 160 kN. The 10 t version carries 2 t less mass with the same force. In force terms the vibration equals 2.65 times the machine’s own weight, against 2.21 times on a 12 t roller.

What the extra tonnes buy is static weight on the drum. Where the layer is thick or the density target is high, that weight matters and the 12 ton road roller is the safer pick. On granular fill that responds well to vibration, a 10 ton road roller delivers the same dynamic force from a lighter machine.

10 t against 8 t and 12 t

Item LCS208H, 8 t LCD210H, 10 t LCS212H, 12 t
Centrifugal force 70 kN 260 / 160 kN 260 / 160 kN
Vibration frequency 43 Hz 28 / 35 Hz 29 / 35 Hz
Travel speed 0–10 km/h 0–12 km/h 0–10.2 km/h
Gradeability 25% 35% 30%
Overall size 5,030 × 1,880 × 2,570 mm 5,650 × 2,280 × 3,000 mm 5,610 × 2,280 × 3,000 mm

Moving from 8 t to 10 t adds 25% to the weight and multiplies centrifugal force by 3.7. It also adds a second, lower force setting of 160 kN, so one machine can strike hard on deep fill and lightly on a thin top layer. The step from 10 t to 12 t leaves the force unchanged and adds 20% weight. Of the three, the LCD210H climbs the steepest grade, 35%.

The 8 t machine keeps one advantage: it is 400 mm narrower and 430 mm lower, which helps on narrow embankments and under low clearances.

Drum or tyres at 10 t

The two steel drum machines and the tyre roller weigh the same and do different jobs.

  • LC210B and LCD210H compact with one vibrating steel drum. The LC210B is listed for sandy soil, gravel, crushed stone, rock fill and slightly cohesive soil on highway, dam, airport, harbour and railway foundations.
  • LCP1016H compacts with nine tyres in two rows and no vibration. It is listed for asphalt concrete, cement- or lime-stabilized soil and gravel, sand and clay mixtures. At 10,000 kg each tyre carries about 1,110 kg. With ballast at 16,000 kg each carries about 1,780 kg.

Between the two drum machines, the choice is drive. The LC210B has a mechanical travel drive, one vibration frequency of 30 Hz and a dual braking system. The LCD210H has full-hydraulic drive with stepless speed to 12 km/h, two frequencies and Danfoss hydraulic components, and it is listed for high-altitude construction conditions. More on the tyre machine is in the pneumatic tire roller guide, and the drum settings are explained in vibratory roller amplitude and frequency. For the basics, read what is a road roller.

LCP1016H pneumatic tyre roller, 10 ton before ballast
LCP1016H: 10 t empty, 16 t ballasted, 4 + 5 tyres.

Shipping size

The catalogue lists the LC210B at one unit per 40HQ container, or three units in two 40HQ containers. The 10 t drum rollers are 2,280 mm wide and 3,000 mm tall, the same as the 12 t models, so the container plan does not change between the two weights. The 8 t LCS208H loads two units per 40HQ.

10 ton road roller questions

How much does a 10 ton road roller weigh in pounds?

10,000 kg is 22,046 lb, or 11.0 US tons.

What engine does a 10 ton road roller use?

A Cummins 6BT5.9 on both single drum models, rated 97 kW on the LC210B. The LCP1016H uses a 75 kW Cummins 4BT3.9 or QSB3.9.

Is a 10 ton road roller enough for road base?

The LC210B is listed for highway foundations and for sandy soil, gravel and rock fill. It delivers the same 260 kN centrifugal force as the 12 t models.

Which 10 ton road roller suits asphalt?

The LCP1016H pneumatic tyre roller, which is listed for asphalt concrete and upper highway courses. For a steel drum finish, see single drum vs double drum roller.

How fast does a 10 ton road roller travel?

10.5 km/h on the LC210B, up to 12 km/h on the LCD210H and 14 km/h on the LCP1016H.

Get a 10 ton road roller quotation

Send us the material, the layer thickness, the site grades and your destination port. We will confirm whether 10 t or 12 t fits and send the specification sheet.

Comparing suppliers? See eight road roller manufacturers and the figures to ask each one for.