LICH

12 Ton Road Roller: 3 Models, Specs and Drive Choice

Compare three 12 ton road roller models: linear load, centrifugal force, drive and engine, plus what 12 t adds over 8 t and 14 t and how each ships.

Published by LICH ·

A 12 ton road roller is the size where single drum compaction moves up to large foundation work: highways, dams, airports, ports and rock fill. LICH lists three of them: the mechanical-drive LC212B and the full-hydraulic LCS212H and LCD212H. This guide compares the three on published figures, calculates what a 12 ton road roller adds over the sizes either side of it, and sets out how to choose between mechanical and hydraulic drive.

Three 12 ton road roller models compared

LC212B LCS212H LCD212H
Drive Mechanical travel Full hydraulic Full hydraulic
Operating mass 12,000 kg 12,000 kg 12,000 kg
Static linear load 280 N/cm 286 N/cm On request
Amplitude (high / low) 1.6 / 0.8 mm 1.6 / 0.8 mm On request
Centrifugal force 260 / 160 kN 260 / 160 kN 260 / 160 kN
Vibration frequency 30 Hz 29 / 35 Hz 28 / 35 Hz
Travel speed 2.0 / 4.0 / 10.5 km/h 0–10.2 km/h 0–12 km/h
Gradeability 30% 30% 35%
Engine Cummins 6BT5.9, 97 kW Cummins 6BT5.9, 110 kW Cummins 6BT5.9
Drum width 2,100 mm 2,100 mm On request
Overall size (L × W × H) 5,650 × 2,280 × 3,000 mm 5,610 × 2,280 × 3,000 mm 5,650 × 2,280 × 3,000 mm

Figures from the LICH product catalogue, read on 6 November 2026. Each model page lists the full specifications.

Our calculation: what each step up in weight adds

Static linear load is the weight on each centimetre of drum. We also divided centrifugal force at high amplitude by drum width to get a dynamic load per centimetre, so the vibration can be compared between sizes.

Model Operating mass Drum width Static linear load Centrifugal force (high) Dynamic load per cm
LCS208H 8,000 kg 1,700 mm 230 N/cm 70 kN 412 N/cm
LCS212H 12,000 kg 2,100 mm 286 N/cm 260 kN 1,238 N/cm
LCS214H 14,000 kg 2,100 mm 326 N/cm 290 kN 1,381 N/cm
LC216B 16,000 kg 2,100 mm 373 N/cm 320 kN 1,524 N/cm
LCS718H 18,000 kg 2,130 mm 470 N/cm 390 kN 1,831 N/cm

The biggest jump in this list comes first. Going from 8 t to a 12 ton road roller raises static linear load by 24% and multiplies centrifugal force by 3.7. Going from 12 t to 14 t adds only 14% and 12%. So if the 8 t machine is too light for your layers, 12 t is a large step, and 14 t is a smaller refinement of it. The 10 t LC210B and LCD210H list the same 260 / 160 kN as the 12 t models, so the extra 2 t goes into weight on the ground, not stronger vibration.

On the LCS212H, the 286 N/cm static load across 2,100 mm equals about 6,100 kg on the drum, which is 51% of the machine. The rest sits on the rear tyres that drive it. The amplitude and frequency guide explains how to read these figures.

Mechanical or full hydraulic?

  • Travel: the LC212B has three speeds (2.0, 4.0 and 10.5 km/h). The LCS212H and LCD212H have stepless hydraulic drive, up to 10.2 and 12 km/h.
  • Vibration: the LC212B runs at one frequency, 30 Hz. The hydraulic models offer two, so the frequency can follow the amplitude.
  • Power: 97 kW on the LC212B and 110 kW on the LCS212H, both from a Cummins 6BT5.9.
  • Grades: the LCD212H lists 35% gradeability, against 30% on the other two.
  • Altitude: the LCS212H and LCD212H are documented for operation above 4,000 m, useful for mountain road projects.
  • Materials: the LC212B is listed for non-cohesive and slightly cohesive materials such as sandy soil, gravel, crushed stone and rock fill. The LCS212H adds aggregate mixtures and cohesive material.

In short, choose the mechanical 12 ton road roller for steady work on granular fill, and a hydraulic one for variable speed, grades, altitude or more cohesive soils.

Where a 12 ton road roller fits

  • Highway foundations and road base.
  • Mine and industrial sites.
  • Dam and airport foundations.
  • Port and railway construction.
  • Large earthworks in sandy soil, gravel and rock fill.

For wearing courses and asphalt, choose a double drum machine instead; see single drum vs double drum roller. For the other weights, the road roller weight chart lists all 24 models, and single drum rollers shows the full class.

Shipping a 12 ton road roller

The catalogue lists the same container plan for the LC212B and LCS212H: one unit in a 40HQ container, or three units in two 40HQ containers. Both measure 2,280 mm wide and 3,000 mm tall, so ask how the machine will be prepared for loading when you confirm the shipping method.

What to send for a quotation

  1. The material and layer you need to compact, and the density target.
  2. The site conditions: grades, altitude and working hours.
  3. Your preferred drive, or the reasons above so we can suggest one.
  4. The destination port, quantity and trade terms.

Questions about 12 ton road rollers

How much does a 12 ton road roller weigh?

All three LICH models list an operating mass of 12,000 kg, about 26,455 lb.

How wide is a 12 ton road roller?

The LC212B and LCS212H have a 2,100 mm drum and a 2,280 mm overall width.

What engine does it use?

A Cummins 6BT5.9 on all three, rated 97 kW on the LC212B and 110 kW on the LCS212H.

Is there a 12 ton tandem roller?

The LICH tandem range steps from the 8 t LC208 to the 14 t LC214. For asphalt at this size, compare the LC214.

Tell us the material, layer thickness and site conditions. We will recommend the 12 ton road roller that suits the work and send a written quotation with the configuration, shipping method and trade terms.

Related reading: see single drum, tandem and tyre models together in the vibratory rollers range.

Related reading: the 10 ton road roller delivers the same 260 kN from a lighter machine, and what is a road roller explains how weight and vibration compact a layer.