LICH

Road Roller Manufacturers: 8 Brands Compared

Road roller manufacturers compared: LICH's 24 export models plus Ammann, BOMAG, Cat, Dynapac, HAMM, Sakai, SANY and Wacker Neuson, with specs to ask.

Published by LICH ·

Road roller manufacturers range from compaction specialists with a century of history to large construction machinery groups. This guide starts with LICH, which supplies 24 road rollers from 330 kg to 30 t with full published figures, then compares eight well-known road roller manufacturers on what each one states on its own website: the company behind the brand, the roller types it lists and its published weight ranges. The last sections set out the figures to ask every road roller manufacturer for, with LICH values as the reference.

Every LICH model is on the road roller page with its full specification.

Why buy road rollers from LICH

LICH, the brand of Henan Lichi Intelligent Equipment Co., Ltd. in Zhengzhou, supplies 24 road rollers for export, so a whole compaction fleet can come from one source:

  • Every size in one range. 12 single drum rollers from the 330 kg LC600 to the 18 t LCS718H, 10 tandem rollers from the 560 kg walk-behind LC600 to the 14 t LC214, and 2 pneumatic tyre rollers covering 10 to 30 t with ballast.
  • Full figures for every model. Static linear load, amplitude, frequency and centrifugal force are on each model page, so you can compare them with other road roller manufacturers before you ask for a quote.
  • Cummins power. Every single drum roller from 8 to 16 t runs a Cummins engine, and the full-hydraulic H models use Danfoss hydraulic components.
  • Mechanical or full-hydraulic drive. At 10, 12 and 16 t you choose between the B series with mechanical travel and the H series with full-hydraulic drive.
  • Engine versions for your market. The LC214 and LCP2030H come in Stage II and Stage III configurations, and the LCP1016H with a Tier II or Tier III Cummins engine.
  • Ready for tough sites. The H series single drum rollers from 8 to 14 t are listed for high-altitude construction conditions.
  • Shipping planned in advance. The LC212B loads one unit per 40HQ container, or three units in two 40HQ containers, and the LCS208H loads two units per 40HQ.

Send us the material, the layer thickness and your destination port, and we will match the model and quote the exact configuration. Browse single drum rollers and tandem rollers, or see every model by weight in the road roller weight chart.

Road roller manufacturers at a glance

Brand Company details on its website Roller types on its website
LICH Brand of Henan Lichi Intelligent Equipment Co., Ltd., Zhengzhou, China; supplies 24 road rollers for export Single drum, tandem (including walk-behind and ride-on) and pneumatic tyre rollers
Ammann Describes itself as a Swiss supplier of mixing plants and machines Soil and asphalt compactors, including the ARX articulated tandem rollers and the ART pneumatic-tyred roller, plus light equipment
BOMAG A member of the international FAYAT Group Asphalt rollers, single drum rollers and soil compactors
Caterpillar (Cat) Cat compactors line for soil, landfill and paving work Vibratory soil compactors, tandem vibratory rollers, pneumatic rollers
Dynapac Part of the FAYAT Group Single drum, heavy and light tandem, pneumatic tyre, static three-drum, tamping, utility and walk-behind rollers
HAMM Part of the Wirtgen Group, with over 200 roller models Tandem rollers, soil compactors, pneumatic tire rollers, remote-controlled trench rollers
Sakai Compaction specialist since 1918; Sakai America, active since 1976, builds in Adairsville, Georgia and in Japan Asphalt rollers, including combi and pneumatic tire models, and single drum soil compactors
SANY Construction machinery group with a road machinery range Single drum rollers with single or dual drive, tandem drum rollers, pneumatic tyre rollers
Wacker Neuson Range also covers rammers, plates, excavators and wheel loaders Walk-behind rollers, a remote-controlled trench roller, tandem rollers from the RD12 to the RD45, single drum soil compactors from the RC50 to the RC110

LICH first, then the other brands in alphabetical order. Source: the LICH product catalogue and each company’s website, read on 13 November 2026.

LICH LCD214H single drum road roller
LCD214H single drum roller, one of the 12 single drum models in the LICH range.

Published weight ranges

Three of the eight road roller manufacturers state the weight range of each roller type on their websites. The table sets them beside the LICH range.

Roller type HAMM Sakai America SANY LICH
Single drum / soil compactor 5–25 t 5–16 ton 10,000–26,000 kg 330 kg–18 t
Tandem / asphalt roller 1.5–14 t 1.5–15 ton 3,000–14,000 kg 560 kg–14 t
Pneumatic tyre 8–28 t, depending on ballast TS160-4 model 16,000–30,000 kg maximum operating weight 10–30 t with ballast

Source: company websites, read on 13 November 2026. Sakai America lists weights in tons as shown on its US site.

Three things stand out when these road roller manufacturers are set side by side:

  • The heaviest tandem rollers meet at about 14 t. HAMM, SANY and LICH all top out at 14 t, and Sakai America at 15 ton.
  • Single drum ranges start at different points. SANY’s single drum range begins at 10 t. LICH starts with the 330 kg LC600 walk-behind single drum roller and fills the 8 to 18 t band with 11 machines.
  • Pneumatic tyre rollers are sold by ballast range. The same machine works across a span, such as 10 to 16 t on the LCP1016H and 20 to 30 t on the LCP2030H.

Figures to ask every road roller manufacturer for

A brochure weight says little about compaction on its own. Ask each road roller manufacturer for the same line of figures for the model it offers. The reference column shows the LICH values for a 12 t single drum roller and a 14 t tandem roller.

Figure Why it matters LICH reference
Operating weight Sets the class, the trailer and the container LCS212H: 12,000 kg
Static linear load Weight on each centimetre of drum LCS212H: 286 N/cm; LC214: 333 N/cm
Vibration amplitude How far the drum moves with each blow LCS212H: 1.6 / 0.8 mm; LC214: 0.8 / 0.4 mm
Vibration frequency Blows per second LCS212H: 29 / 35 Hz; LC214: 40 / 46 Hz
Centrifugal force The dynamic force added to the weight LCS212H: 260 / 160 kN
Drum width Width covered in each pass 2,100 mm on both
Engine and emission stage Decides which markets accept the machine LC214: Cummins 6BT5.9 for Stage II, QSB5.9 for Stage III

Figures from the LICH product catalogue, read on 13 November 2026. The amplitude and frequency guide explains how to read the vibration figures.

Emission stage deserves a line in every request. SANY’s roller list names Euro II, Euro III and EU Stage IIIA versions of some models, and LICH offers Stage II and Stage III engine configurations on the LC214. The right version depends on the rules in the country where the roller will work.

LICH LC208 tandem road roller
LC208 tandem roller: 8,000 kg on two steel drums.

How to shortlist road roller manufacturers

  1. Start from the job. Soil, base and rock fill call for a single drum roller. Asphalt calls for a tandem or pneumatic tyre roller. The road roller types guide matches each type to its layer.
  2. Fix the weight class. Check that each road roller manufacturer on your list covers it, using the weight range table above.
  3. Request the same line of figures from every supplier and compare them row by row.
  4. Confirm the engine version for your country’s emission rules.
  5. Check parts and service for your region: dealers, delivery times and the wear parts to keep on site.
  6. Agree the shipping plan: overall dimensions, container or flat rack, and the destination port.

New to compaction? Start with what is a road roller, then compare sizes in the 10 ton road roller and 12 ton road roller guides.

Road roller manufacturers: questions

Who are the main road roller manufacturers?

Well-known names include Ammann, BOMAG, Caterpillar, Dynapac, HAMM, Sakai, SANY and Wacker Neuson. LICH supplies 24 road rollers for export from Zhengzhou, China.

Which road roller manufacturers make walk-behind rollers?

Dynapac and Wacker Neuson list walk-behind rollers. In the LICH range, the LC600 comes as a 330 kg single drum and a 560 kg tandem walk-behind roller; see the mini road roller guide.

What is the heaviest road roller these manufacturers list?

Among the published ranges above, the heaviest single drum rollers reach 25 t at HAMM and 26 t at SANY. Ballasted pneumatic tyre rollers go further: 28 t at HAMM and 30 t at SANY and LICH.

What should I ask a road roller manufacturer before buying?

Operating weight, static linear load, amplitude, frequency, centrifugal force, drum width and the engine emission stage, plus the parts list and the shipping dimensions.

Why buy a road roller from LICH?

LICH supplies 24 road rollers from 330 kg to 30 t, publishes the full figures for every model, uses Cummins engines on its 8 to 16 t single drum rollers and states the container plan. Each quotation states the exact configuration supplied.

Get a LICH road roller quote

Send us the material, the layer thickness, the weight class and your destination port. We will send the matching LICH model with the full line of figures above, ready to set beside quotes from other road roller manufacturers.

Related reading: the same comparison for motor grader manufacturers and for mini excavator brands.